You are here: Home PUB

PUBLICATIONS

 

33. Research on the transport and thermodynamic properties of Sr2+ and Cs+ in LiCl–KCl using deep potential molecular dynamics

DOI:10.1007/s10967-024-09757-3

32. CeCl3 concentration effects on cyclic voltammogram overlap in LiCl-KCl eutectic molten salt

DOI:10.1016/j.jelechem.2024.118620

31. Nobility vs. mobility: Insights into molten salt corrosion mechanisms of high-entropy alloys via high-throughput experiments and machine learning

DOI:10.1016/j.matt.2024.05.004

30. Investigation of electrochemical characteristics and nucleation mechanism of cerium influenced by F− in LiCl-KCl-CsCl melts   

DOI:10.1016/j.molliq.2024.124582 

29. Radionuclide tracing based in situ corrosion and mass transport monitoring of 316L stainless steel in a molten salt closed loop

DOI:10.1038/s41467-024-47259-8

28. Thermodynamics of corrosion products in molten nitrate salts

DOI:10.1016/j.jnucmat.2023.154713

27. Effects of F-on the electrochemical properties and electrodeposition ucleation mechanism of Ce (III) in LiCl-KCl melts

DOI:10.1016/j.jelechem.2023.11767

26. Activity gradient mass transport accelerated corrosion of stainless steel in molten salt

DOI:10.1016/j.apmt.2023.101850

25. Nobility vs Mobility: Unlocking New Insights Into Molten Salt Corrosion Mechanisms of High Entropy Alloys with High-Throughput Experiments and Machine Learning-Enabled Analysis

DOI:10.2139/ssrn.4535248

24. High-Throughput Electrochemistry to Study Materials Degradation in Extreme Environments

DOI:10.1021/acs.analchem.2c03325

23. A High Throughput Experimentation & Material Informatics Platform for the Discovery of Molten Salt Reactor Candidate Structural Materials

DOI:10.1149/MA2022-0212760mtgabs

22. Integrated High‐Throughput and Machine Learning Methods to Accelerate Discovery of Molten Salt Corrosion‐Resistant Alloys

DOI:10.1002/advs.202200370

21. In Situ Corrosion Monitoring of the T91 Alloy in a Molten Chloride Salt Using a Miniaturized Electrochemical Probe for High-Throughput Applications

DOI:10.1021/acs.analchem.1c05196

20. A First-Principles-Based Approach to The High-Throughput Screening of Corrosion-Resistant High Entropy Alloys

LicenseCC BY-NC-SA 4.0

19. Accelerated Discovery of Molten Salt Corrosion-resistant Alloy by High-throughput Experimental and Modeling Methods Coupled to Data Analytics

LicenseCC BY 4.0

18. Method for Identification of Redox Control Parameters for Corrosion Mitigation in Molten Fluoride Salts

DOI:10.1016/j.jnucmat.2020.152624

17. Electrochemical behavior and separation of iodide in molten LiF-NaF-KF melt

DOI:10.1016/j.jnucmat.2020.152468

16. Electrochemical Separation of Lanthanum Oxide in Molten FLiNaK Salt

DOI:10.1080/00295450.2020.1757976

15. Electrochemical Properties of CrF2 in FLiNaK Molten Salt and the New Analytical Methods for Their Determination

DOI:10.1149/1945-7111/ab8923

14. Transport and Kinetics Properties of LaF3 in FLiNaK Molten Salt Determined by Electrochemical Methods

DOI:10.1016/j.jfluchem.2020.109502

13. Selective Electrodeposition of Europium and Samarium in Molten LiCl-KCl with Copper and Aluminum Electrodes

DOI:10.1149/1945-7111/ab628a

12. Europium Induced Alloy Corrosion and Cracking in Molten Chloride Media for Nuclear Applications

DOI:10.1016/j.corsci.2019.108279

11. Electrochemical extraction of lanthanum in molten fluoride salts assisted by KF or NaF

DOI:10.1016/j.elecom.2019.05.017

10. Short communication: Electrochemical separation study of LaF3 in molten FLiNaK salt

DOI:10.1016/j.jnucmat.2019.03.007

9. Thermodynamic Properties of K and Li in Liquid Bismuth Determined by emf Measurements

DOI:10.1149/2.0191913jes

8. Calculated thermodynamic properties of GdCl 3 in LiCl - KCl eutectic molten salt

DOI:10.1016/j.jnucmat.2018.05.030

7. Integrated model development for safeguarding pyroprocessing facility: Part II – Case studies and model integration

DOI:10.1016/j.anucene.2017.09.036

6. Integrated model development for safeguarding pyroprocessing facility: Part I-model development and validation

DOI:10.1016/j.anucene.2017.09.050

5. Review—Modeling Electrochemical Processing for Applications in Pyroprocessing

DOI:10.1149/2.1021813jes

4. Concentration-dependent Activity Coefficients of Lanthanides in Liquid Bismuth for the FHR Primary Coolant Cleanup

DOI:10.1016/j.anucene.2017.11.017

3. Measurement of europium (III)/europium (II) couple in fluoride molten salt for redox control in a molten salt reactor concept

DOI:10.1016/j.jnucmat.2017.09.027

2. Thermodynamic properties of fission products (Pr, Ce, Er) in liquid bismuth by thermodynamic assessment

DOI:10.1016/j.jnucmat.2017.08.016

1. Investigation of concentration-dependence of thermodynamic properties of lanthanum, yttrium, scandium and terbium in eutectic LiCl-KCl molten salt

DOI:10.1016/j.jnucmat.2016.05.043